Solid walls made of natural wood

The structure of OSB of 18mm thick confers on the walls a great mechanical resistance and a good dimensional stability in a wet atmosphere. Covered internally and outside with Swedish pine of 25mm thick (treated and furnace-dried wood) and finished and finished with a matt open pore varnish, The materials allow to achieve a great performance facing external agents.

Parquet floor

The parquet floor combines the esthetics of wood with ideal design features. Five layers of  acrylic resin and a UV protection makes it resistant to wear and tear. The support and the insulation are ensured by a panel of OSB and the polyurethane foam.

Doors

Solid doors in pine are fitted with polyurethane foam and screws, polished and varnished with a matt finish.

Windows

Climalit windows with a 10mm air chamber are used. They permit decreasing the heat loss about 50%, and increase the soundproof an 80% compared to traditional windows. If the internal shutter is closed during the nights, the heat loss decreases an aditional 10%. The design of the houses allows a natural ventilation by creating a draught which cools the house during the hot months.

Electric installation

The installation is with three-phase cable of  2.5. 3 independent circuits Capacity: 40 Amps. The separation of the circuits makes it possible to add or remove elements without running the risk of damaging the whole country cottage. The resistance of the elements installed is higher than the ones that are commonly used. - Bulbs of 60 W. - Differentials and automatic shutter release.

 
Metal frame
 
All our houses are constructed 100% in the factory, and once they’re finished they are transported in units to the location. This is possible due to an ironed frame, that provides hardness and structural resistance to the cottage. Swedish pine wood is dried 12% in a furnace, which provides heat in winter time and a pleasant fresh sensation in the summer. As example, during the winter, the needed power to condition a square metre is 223,5 watts, in other words, nearly every room can be conditioned with a 2000 watt  heater.

Roof

Inside there are visible beams of 150x45mm. that combine hardness and style.
Outside there are metalic roof tiles of electroplated steel, covered with granulated rock, and fungicide. System certified by the ISO 9002 standards.
Rockwool is used as insulator. This material decreases the loss of heat during winter months about 36%, because it creates vapour barriers which allow the humidity to flow towards the outside part of the house, increasing the life span and efficiency of the insulator.
In addition it resists hard rains, winds with snow, the technology employed in these materials decreases acoustic pollution and prevents mushroom formation on the surface of the roof.

Sanitary facilities

We use esthetic and safe avant-garde elements.
The alternatives vary according to the customer needs. The different sanitary elements are from recognized brands to ensure the reliability: Teka, Sangra, Thermor, Aquanova… All the elements fulfill the standards ISO 9002 requirements.